Today’s RowPro-scheduled training session was 6K designated as a time trial.
A time trial is supposed to be done as a race, as fast as humanly possible. I wasn’t in the mood for a solo race today, so I eased back on the pace, to vigorous but definitely less than race pace and alternated each 1,000 meters between that and a slow and easy pace.
It was fun and still felt like a healthy bit of rowing.
Today’s fun in rowing was supposed to be an attempt at the April 2017 C2CTC challenge. But it seems that I started out too fast. It was composed of 7 short intervals of 177, 177, 177, 777, 177, 177 and 177 meters with 7 minutes total rest arranged anyway a person wanted to divide it up between the intervals. But I guess I did the first 3 of the 177 meter intervals too fast, because I started to have trouble in the middle interval of 777 meters and had to slow way down. So the whole session was spoiled and far from optimal but I finished it anyway. Maybe I’ll try doing it again sometime this month. (A person can do it over as many times as desired during the month but can only make one official entry which would be the best one from among the multiple attempts).
When I went to the C2CTC site to record the results, I discovered that they had changed the challenge from the seven intervals described above, to doing one round of the “Fish game” on the PM. Oh well. Maybe I’ll try doing the Fish Game tomorrow.
I also did a training session but first, here is the data and screen shots for the C2CTC attempt (which was done in vain…):
Now, for the images and data of the training session, which was 2x100m within a total session distance of 2K.
Definition of laid-back |ˌlādˈbak| adjective, informal: relaxed and easygoing.
Today’s training session was a laid-back “recovery” session, 6K distance. There was a 2K warmup and 2K warm down. Before the rowing, there was a strength-training push-ups session which will be listed at the end of this post.
The strength-training session results for today are on the bottom line:
Today’s rowing training session was two 500 meter intervals done at a low rating. That was about it, except for the rest of the distance which was the remainder of 6000 meters, all done at an easy effort level. There was a total of 4,000 meters for warmup + warm down.
Yesterday and the day before were each 6K recovery sessions. Today was a recovery session also but it was even shorter, at 5K, so perhaps it could be called a recovery from recovery. Tomorrow will be a little bit of hard rowing, but not much.
There was also a push-ups strength training session today, which will be featured after the rowing data.
The pushups results are on the bottom line below. I came up a lot shorter on the sets where actual was less than goal, because today I only took the specified 60 seconds rest between sets.
This morning I was looking into the possibility of either replacing the PM3 with a PM5. Or getting a new heart strap. Or even the possibility of doing both. Before making a decision regarding those choices, I re-visited the rowing machine, unplugged all three cables (USB cable to desktop computer which runs RowPro, cable connecting PM3 to rowing machine’s Power Generator Assembly and the cable connecting the PM3 to the heart rate signal receiver). After looking at the plugs of all three cables, I plugged them back into the PM3.
Also, I removed and checked the heart rate receiver, which is mounted under the rowing machine rail. Then I re-placed the heart rate receiver back to its location under the rail.
After that, I donned one of the 2 heartstraps and got a heart rate readout. Then, I switched to the other heartstrap and also got a readout from that one.
So though I don’t know why there was no readout yesterday, the problem seems to have been cured.
Today’s training session was an easy 6K with an additional warmup and warmdown totalling another 4K. Same as yesterday, but it was done with more enthusiasm with HR readout on screen.
Today’s session was an easy/recovery 6K. There was a problem though, in that there was no heart rate display. Tried two different straps and batteries. So at this point I don’t know if both straps have failed or if the HR receiver on the Concept 2 rowing machine has a problem.
Without a heart reading, I couldn’t get enthusiastic about rowing.
There was also a strength-training/pushups session scheduled for today. No HR is needed for that. The results of the pushups program session will follow the rowing information.
The pushups session showed a little progress even though the actual results didn’t reach goal amounts in all sets.
Today’s rowing session was slightly hampered by a virus. The positive thing about the virus is that it resulted in more sleep than usual. The not so positive thing about it is that I felt slightly feverish and low energy and had to waste a lot of tissue paper blowing my nose.
Today’s training session was six 2K intervals patterned as 6x2Kr500 within a total distance of 16,000 meters. With 1,250 meters total warmup and warm down.
Due to low enthusiasm matching the low-energy, the training session was done in a no-strain whatsoever manner.
Today’s training session was described (as you can see in the screenshot below) as “row fast for long times”. The rowing fast consisted of three 500 meter intervals nestled at the front of a total 10,000 meter distance.
Okay RowPro… if you think the time it takes to row 500 meters is a long time that’s fine with me. Other than the 3 x 500m, it was an easy session, which was also quite fine.
If you wonder why I didn’t apply the part where it says “focus on doing the fastest Pace you can sustain for 20-60 min” to the longer than 20 minute balance of the 10K … notice that there was a HR zone for the balance of the 10K. When complying with keeping HR between 89-112, I’m rowing an easy pace which is a lot slower than what could be sustained for 20-60 minutes.
During the time after the 3x500m, I watched part of a movie and watching the movie took more mental effort than did the rowing within HR zone of 89-112.